The Dicar Anvilok III glue lap system converts steel to steel to the soft cutting of glue laps. This saves excessive wear on shaft bearings and extends the life of cross cut knives. Further, it prevents damage to the head through excessive knife pressure. This system can also be adapted to existing soft cut systems.
The Anvilok III hand hole system inexpensively adds die cutting capabilities to flexo-folder-gluers and printer-slotters. By mounting the Anvilok III on the slotting shafts, hand holes and other useful diecut configurations can be accomplished right on the machine. This can eliminate the necessity of a second pass on another machine or the addition of an expensive separate diecutting section. Like our Equalizer, Anvilok III incorporates Dicar's exclusive slip bearing for self-indexing cutting accuracy. A side oscillation option is also available.
The Anvilok III can be supplied for most existing machines to convert virtually any printer-slotter or flex-folder-gluer to rotary cutting or soft anvil glue lap cutting.
|
Request information on the Anvilok III system for your machine: |
|
 |
The Dicar Logo, Boltless and the blue color of Dicar's die cutting blankets are trademarks and the name Dicar, Equalizer, Anvilok III, Equalok and Crushless are Registered Trademarks of Dicar, Inc.