Registration
What do I do if there is a lack of pull rubber on cutting die?| Answer |
If there is a lack of pull rubber on the
cutting die, new pull rubber should be installed. |
What should I do if there is worn Pull Rubber?
| Answer |
If there is worn pull rubber, new pull rubber should be
installed to replace it. |
Improperly replaced pull rubber
| Answer |
Check the location of the pull rubber for the proper
sheet control. |
Improper pull collar setting
| Answer |
If the pull collar is improperly set, you should adjust
the pull collars. |
The Dicar Logo, Boltless and the blue color of Dicar's die cutting blankets are trademarks and the name Dicar, Equalizer, Anvilok III, Equalok and Crushless are Registered Trademarks of Dicar, Inc.